MAGCRETE is a relatively fast-reacting polymer ceramic cement that is 100% inorganic, noncombustible and moisture resistant granting these as well as other characteristics to filler materials and reinforcements. In contrast to other magnesia cement systems this cement will accept and perform very well with most of the known fillers, aggregates and various waste materials, including most metals. MAGCRETE is economically and environmentally superior to current practices due to the fact this cement utilizes a cold fusion curing process to encapsulate the various filler materials. No water is used in the mixing stage allowing low permeability resulting in excellent freeze-thaw resistance compared to other cements.

ATTENTION: There has been recently developed a FOAMED version of MAGCRETE with closed-cell structure. Besides the basic properties of the prototype MAGCRETE, FOAMED MAGCRETE features high thermal insulation properties combined with low gas permeability and water absorption, high mechanical strength, fire resistance, low specific weight, cost-efficiency, etc. Its raw liquid system can be poured into moulds and voids, and it can be pre-formed in any shape according to the need, with a wide variety of applications. Detailed technical and performance characteristics will be made available to the public after completion of tests.

 

Left click on picture to enlarge.

Top View

Looking down at the Magcrete molded block panel you can see that it molds nicely to any texture desired.

Self Anchoring

You can see that the Magcrete is self anchored into the foam for added strength.

Side View

The Magcrete foamed panel in this picture gives you an idea of the thickness of the Magrete.

Insulated Wood Look Alike

This panel is a replacement for conventional siding, being fireproof it is ideal for protecting your valuable property from fire while maintaining a natural wood look.

Side View

This picture reveals the thin foam core of the Magcrete wood look alike siding.

Top Side View

You can probably get a good idea at how light this product is with the thin Magcrete finish and foam core.

Closer Look

This is a little closer view to reveal the detail in the wood look alike.

Encapsolated Foam Core

This is a piece that has the foam core totaly encapsolated. This would be preferred if the foam was not Fire resistant.

Foam Core

Here you can see the foam core. The dark spot on the serface is were I ran a burn test. as you can see the flame was quiet ineffective.

Magcrete Solid Panel

This is a prototype of a solid board that wood be a long lasting replacement for wood sheeeting and can be used for roofing, flooring and decking.

Side Top View

This picture will give you some idea at the thickness and structure of the panel.

Fake Shake

This Cedar fake shake is fireproof, weather proof and will outlast anything on the market today.

Top View

This will show you the detail of the cedar shake that is preserved when molded.

Close up

In this picture you get an idea of the mix including filler. The filler here is a natural agricultural by product.

 

 

Products    Services    Featured Products    Links    News    Contact Us    Contents